You are here: Home » Products » Ball Valve » Ductile Iron Eccentric Half Ball Valve in Water Power Plant

Product Detail

loading

Share to:
sharethis sharing button

Ductile Iron Eccentric Half Ball Valve in Water Power Plant

Top-mounted eccentric half ball valve
Productintroduction
Top-mounted eccentric half ball valve design reasonable structure, high strength, no vibration at high flow rate. Suitable
for water, sea water, oil and other media.ln pipeline with check and cut-off funcition.
Availability:
Quantity:
  • QP947F(H)

  • SHSUOTE

1) Description

Eccentric ball valve is the metal ball crown and fixed on the eccentric shaft, eccentric crankshaft rotation, opening and closing of the valve. Contact with the metal ball crown sealing surface of metal seated in axial and radial floating, to compensate the mismatch error of spherical cap and valve seat. The structure of simple, reliable and effective way of seal to make it not but can be an advantage to replace other valves, and can be applied to they do not use the system, such as power plants, metallurgy, cement, paper and other industries of coal powder, ash, such as pulp material pipeline sealing surface can adopt different sealing material to apply various working environment.

2) Features

1. Eccentric crankshaft and hemispherical structure

Using the eccentric principle, namely the valve port different heart center and crankshaft principle. In the process of closing, the valve ball crown gradually to the seat. At the moment close to achieve reliable seal, avoid the valve opening and closing process remain the state of friction pair of seal, valve ball for hemispherical. Open the valve ball crown hidden in valve cavity, from medium appropriate sealing wash set;At the same time to ensure the valve full flow channel circulation, the maximum eye degree to reduce the energy loss, head loss is almost zero.

2. Small installation space

The installation height of the valve is smaller than the steel valve of the same specification, similar to the butterfly valve, and the structure length is smaller than the standard ball valve and similar to the butterfly valve. Besides, the installation is not limited by the direction of water flow and the installation space, and can be installed at any Angle;Online push repair, maintenance. Do not need to be removed from the pipeline.

3. Double seal

A fluororubber seal ring is sintered on the stainless steel crown with special process, which has two kinds of seals, soft and hard. Even if the soft seal is worn or damaged, a reliable seal can be achieved.Depending on the circumstances of the eccentric half - ball valve this design will be applied to the seat.

4. Labor-saving bearing

The upper and lower stem is provided with thrust suction bearing. The composite Shaft Sleeve reduces the transmission torque and has prominent advantages in the choice of electric actuator.

1) Execution standard:

Design standard

GB/T12465

Flange connection standard

GB/T9113

Structural length standard

GB/T12465

Inspection testing standard

GB/T12465

Technical parameters:

Nominal diameter

DN50-DN1600

Nominal pressure

PN10/PN16/PN25/PN40

Operating temperature

-10-90(Soft sealing)

-40-300℃(Hard sealing

Seal test

1.25PN

Shell test

1.5PN

Suitable medium

Clean Water, dirty Water, original Water, sea Water, steam, oil, etc.

Operating principle:

eccentric half ball valve is to use the oil pump of high pressure oil push the movement of the oil cylinder piston, the crank transmission mechanism to drive the valve rod rotation. Open the door. When the need to close the cock. Press button where the valve, solenoid valve to be open drain circuits, door plank under the energy storage type hydraulic control power, closed after the first fast slow procedure, achieve the goal of energy storage type hydraulic control.

Main parts and material.

No.

Part

Material

1

Body

Ductile iron, cast steel, stainless steel

2

Valve Plug

Ductile iron, cast steel, stainless steel

3

Rubber

Stainless steel

4

Rubber

Multilevel recombination Stainless steel 304316

5

Ball clack hard/soft face

Nitrile Rubber EPDM rubber ball

6

Packing

F4

7

Shaft

2Cr13/1g18v19ti/Stainless steel

8

Axis Guide

Copper composite/Stainless steel composites

Application:

Water plant, secondary water supply, municipal pipe network, reservoir, garbage treatment plant, subway and other industries in municipal engineering;Petrochemical, steel plant, power plant, shipbuilding and paper-making, bio-pharmaceutical, etc



Previous: 
Next: 

CONTACT US

ADD :No. 369,Maoting Road, Chendun Town, Songjiang  District, Shanghai. 
PHONE : +86-15862638675
                +86-15862638675
EMAIL: corrine@suotevalve.com
              jack@suotevalve.com
QQ : 1515863517
Shanghai Suote Valve Co.,Ltd.
With years’ manufacturing experience,we now could offer more than 45 series valves and related parts......READ MORE

QUICK LINKS

PRODUCTS CATEGORY

CONTACT US

    ADD: No. 369,Maoting Road, Chendun Town, Songjiang  District, Shanghai.
   PHONE: +86-15862638675
                    +86-15258035181
   EMAIL : corrine@suotevalve.com
                     jack@suotevalve.com
  QQ1515863517
Copyright ©2023 Shanghai Suote Valve Co.,Ltd. All Rights Reserved